ColDesi Unveils New DigitalHeat FX DTF-24H4 Direct-to-Film Printer

DigitalHeat FX DTF-24H4 high volume direct-to-film printer

ColDesi, Inc announced the release of the new DigitalHeat FX DTF-24H4 high volume direct-to-film printer.

High volume, automated DTF printers have an integrated roll-fed film printer and an integrated hot melt applicator and belt dryer. All producing what the company reports as the best quality fabric (t-shirt) transfers on the market.

Following on the success of the record-breaking DigitalHeat FX DTF-24H2, which is a 24” DTF printing powerhouse with two print heads, ColDesi has released the Four head DigitalHeat FX DTF-24H4.

The new DTF printer from ColDesi prints at an astounding 145-155 linear ft. of full-color film printing per hour, which equates to between 250 and 350 full shirt front transfers.

But the company is equally proud of the technological advancements made in this latest model.

“Whether you’re running a one machine shop, adding transfer production to a high-volume business or replacing expensive direct to garment printers, power requirements are a big deal,” said Don Copeland, digital product manager for ColDesi. “We’ve worked with our in-house R&D team (you might know them as BelQuette Technologies) to reduce the requirements for BOTH the printer and the dryer to a single 30AMP, 220v circuit or run 2 systems off a single 50AMP, 220v circuit! Not only does this cut initial setup costs it can save literally hundreds, even thousands of dollars in power costs over the course of a year – especially for multi-printer shops.”

For a full demonstration of the product and capabilities, ColDesi has provided the following video. 

“The DigitalHeat FX DTF-24H2 2 head machine is rated at between 45 and 55 linear feet per hour production, which is approximately 100 full front transfers per hour, which is more than enough volume for most shops,” commented Mike Angel, head of ColDesi OnDemand software programs. “But the new four head is more than three times as productive which meets virtually ANY demand”.

Other advances include a smoother operation for fewer touches per print job and a centralized control location to reduce interface time overall.

Management also said that just like all of the ColDesi digital systems the DTF line comes with a self-paced online training program that you can put any and all of your operators through as well as included technical support for as long as you own the machine. Every printer comes to you fully assembled, test printed, calibrated, and ready to print – already mounted on the stand. It is simply a matter of installing the print software, rolling the printer and shaker/dryer up to one another, powering up, and going through the simple out-of-box start-up instructions and you are printing transfers – typically within 2-3 hours.

Source: ColDesi 

The preceding press release was provided by a company unaffiliated with Wide-format Impressions. The views expressed within do not directly reflect the thoughts or opinions of Wide-format Impressions.